This is an 12 peice set to replace the 4 screws around the fuel filler and the bolts on the Latch for the filler door on Abarth 500/595/695 models and Fiat 500s.

The kit consists of 6 stainless cap head bolts and 6 coloured washers

Our Engine bay bolt dress up kit is a 24 item kit which smartens up the bolts which often start to show signs of age under the bonnet. 

You have the 4 Large diameter bolts with 4 washers (2 each side)

2 Smaller diameter bolts for near the head lights with washers (1 each side)

6 bolts and washers for the front bumper. (only 4 are required for Series 3 models)

These kits contain high quality stainless bolts and good quality annodised washers. The kits have been fitted and tested with detail applied to ensure the washers are correct for the car and do not leave any unsightly witness marks or halo rings from the original bolts.

Many customers also choose to purchase the header tank bolt kit to match their engine dress up kits

As requested by a few customers, we now sell a bolt and washer for Abarth and Fiat models which have the curved shaped header tank as shown in the images

If your header tank does not look like this, please contact us before purchasing. 

A simple low profile coloured alloy coned washer and a countersunk bolt made from high quality stainless steel

The bolt supplied is a specific length to ensure if meets the same fitment as the original bolt supplied. 

This is a bolt kit to replace the standard Torx bolts which are visable when you open your door which are usually dull black in colour. 

Made from High quality Stainless Allen Key bolts which are counter sunk and premium finished coloured cone washers, this kit fits perfectly. The kit is designed to have the same length bolts as standard along with the low profile head using slim line washers. 

The kit contains 6 bolts and 6 washers

A set of 4 stainless bolts and low profile alloy washers to replace the screws around your rear lamp. 

Made from Marine grade stainless steel, these bolts are counter sunk and have been sourced in the perfect length to match the standard bolts. 

They are sold with 4 coned alloy washers in various colours which are low profile so as not to exceed the standard bolt profile. 

Quick and easy to fit and one of those small deatails which makes a difference when you open the boot. 

Perfect replacement bolt and washer for your tailgate strap. 

This kit includes a stainless steel bolt with caphead. This gives a deeper and bigger bolt head compared to countersunk bolts. The bolt is slightly longer than standard so it will be suitable for most aftermarket strap applications as well.as the standard strap.

The washer is a cup head washer so the bolt sits flush and being slightly over sized, you get a nice bit of colour as well as spreading the load across the strap.